Full strip-outs, walk-in showers and complete refits across Greater Manchester. One team from plumbing to tiling to fit-out — no missed handovers, no lukewarm finish, no surprises on price.
3rd-generation family firm · Fully insured · WaterSafe approved
Full bathroom installation covers everything from the first strip-out to the last silicone bead: waste and supply alterations, floor prep, wall build-outs, waterproofing, tiling, ceiling and lighting, sanitaryware fit, and final commissioning. We handle it end-to-end with one team so quality doesn't fall through the cracks between trades.
Homeowners refitting a tired bathroom, families converting a bath to a walk-in shower, older customers who need level-access showering, landlords upgrading a rental between tenancies, and anyone adding an en-suite to a bedroom or loft conversion.
When the existing suite is dated, tiles are cracked or grouting is discoloured, sealant keeps failing at the bath edge, the layout doesn't work for how you live now, or you're planning to sell and want to modernise the space that most influences valuation.
Bathrooms are the most punishing rooms in a house — daily heat, steam, water and movement. A bathroom that looks fine at handover but was waterproofed badly leaks silently into the flat below or the ceiling void. Doing it properly means proper waste falls, correct wet-area tanking, mechanical fixings for heavy sanitaryware, and finishes that survive real use.
Bathroom horror stories almost always start with the cheapest quote and a general 'handyman' juggling five jobs at once. Missing waterproofing, wrong falls, plastic waste pushed into old cast-iron soil stacks, and silicone hiding gaps behind bath panels are the usual signatures — and you don't see them until the ceiling below is stained.
Poor waterproofing under tiles, or an unsealed shower tray, drips for months before it appears. By then plaster is ruined and joists may need attention.
Cheap MDF plinths, unsealed junctions and no extract fan create a mould garden. Health issue, resale issue, warranty issue on any new units.
The wrong grout colour is annoying; the wrong grout type is a leak. Silicone that lifts on the second season means water is already behind it.
Vague quotes, missing item lists, and 'variations' billed after the fact are how a £6k bathroom becomes a £12k bathroom. A proper written spec avoids it.
Every job follows the same disciplined sequence, so you always know where we are and what's next.
We measure, agree layout, and produce a written specification — every item listed, every finish named, every waste and supply alteration accounted for.
A single price that includes strip-out, prep, waterproofing, tiling, sanitaryware and fit — no vague variations built into the small print.
Protect the rest of the house, remove the old suite, alter pipework and wastes, stiffen floors, build stud walls, run electrics via a Part P electrician.
Tank wet areas properly, tile with the correct adhesive and grout for the location, fit sanitaryware, brassware, screens and accessories to spec.
Full water test, extract fan performance check, snag walk-through with you, and the house left cleaner than we found it.
Same firm for plumbing, tiling and fit-out. No blaming other trades when something's not right.
We size waste falls and supply runs to actually work — no gurgling showers, no lukewarm mixers, no slow drains.
Wet zones are tanked with a proper waterproof membrane before tiling, not left to silicone and hope.
For rentals we spec finishes that survive tenant turnover — no MDF plinths, no fragile chrome, no push-fit where it can't be reached.
You see every line before we start. No 'extras' added afterwards for things we should have seen at survey.
Any snags in the first year, we come back. The same engineer who fitted it picks up the phone.
For bath-to-shower conversions we fit low-profile stone resin trays or a fully tanked wetroom former where the floor can take it. Tray waste positions are checked against joist runs first — never assumed. For older customers, we can specify grab rails, seat options, and thermostatic anti-scald valves.
Standard baths, freestanding baths, shower baths with fixed or hinged screens, and wall-hung basins on concealed brackets. We fit brassware from major UK brands and give an honest steer on what's worth paying for and where the mid-price option is the smarter buy.
Wet zones are tanked with a paintable or sheet membrane. We use the right adhesive for the substrate — S1 flexible on timber floors, cement-based on solid substrates — and epoxy grout where staining is a concern. Junctions are silicone in matched colours, applied properly, not smeared and left.
Electric underfloor heating mats fit neatly under tiled floors, warm on the feet and cost pennies to run in short bursts. Chrome or anthracite towel rails go on a dedicated valve so you can run them in summer without firing the whole heating system.
Extract fans sized to room volume and ducted to outside — not into a loft void. Ceiling downlights IP-rated for zones 1 and 2, on a separate circuit where possible. Small details that stop mould and pass an EICR.
For homeowners we typically go for higher-spec sanitaryware and finishes with slower, more decorative tiling. For rentals we prioritise durability, quick-clean surfaces, robust brassware and easily-replaced components. We'll steer you honestly either way.
Every image below is from a real Eco Plumbing & Heating Solutions job across Greater Manchester. No stock photography.
A full refit varies widely with size, layout changes, tile choice and sanitaryware spec. We give a single written price after a home survey — one number that covers the job, not a range.
A straightforward like-for-like refit typically takes 1.5 to 2.5 weeks. Layout changes, wetrooms and en-suite additions run longer. We give you a firm start date and daily progress.
Both work. We can supply and fit to your spec with trade pricing, or fit what you've bought. Just don't order sanitaryware before survey — waste positions and door swings need checking first.
Yes — this is one of our most requested jobs. We assess floor structure, waste position, and mains flow, then quote for a level-access or low-profile tray solution.
Yes. Wetrooms are fully tanked with either a paintable or sheet membrane, with a linear or gully drain sized to shower flow. Suitable substrate and structural checks are done first.
Yes. Workmanship is guaranteed and all sanitaryware and brassware carry manufacturer warranties. Any first-year snags — we come back and put them right.
We isolate the bathroom supply, protect adjoining floors and stairs with dust sheets and covered runs, and clean daily. You can live in the house while we work.
Yes. We fit landlord-durable specs, provide before/after photos, and can bundle bathroom refits with CP12 gas safety checks in the same visit.
Rochdale, Oldham, Manchester, Salford, Bury, Ashton-under-Lyne, Heywood, Middleton, Shaw and surrounding Greater Manchester.
Yes — see our Our Work page for recent bathroom installs, and our Reviews page for verified customer feedback.
Book a free home survey and we'll produce a written, itemised quote — every item named, every alteration listed. Same team, one price, finished properly.
One team, one standard — across every plumbing and heating job in Greater Manchester.
