Serving Salford · M3, M5, M6, M7, M27, M28, M30

Gas Safe plumbers &heating engineersin Salford.

A third-generation family firm covering Salford from MediaCityUK and the Quays through Eccles, Swinton, Walkden, Pendlebury, Broughton and Kersal. Boilers, bathrooms, heat pumps and apartment installs — quoted in writing within 24 hours.

Salford cover · Gas Safe Reg. 636807 · £5m public liability · Mon–Sat 8am–6pm

Gas Safe
Reg. 636807
3rd generation
Family-run engineers
ATAG approved
Warranties up to 18 yrs
24-hour quotes
Mon–Sat · 8am–6pm
£5m cover
Public liability insured
Local plumbers & heating engineers

Genuinely local to Salford — not a national call-centre.

Salford spans one of the most contrasting mixes of housing in the region — new high-density apartments around Salford Quays and MediaCityUK, Victorian terraces in Ordsall and Weaste, semis in Swinton and Pendlebury, and larger detached homes out toward Worsley. We work Salford daily and adapt our install approach to whatever's actually in front of us.

Response times in Salford

Most Salford enquiries get a survey booked within 24 hours in working hours. Apartment installs at the Quays typically need an extra day to coordinate concierge and communal-riser access.

Salford property types

Salford runs the full range: modern apartment blocks at Salford Quays and MediaCityUK, Victorian and Edwardian terraces in Ordsall, Weaste and Eccles, 1930s and 1950s semis in Swinton, Pendlebury and Walkden, plus larger detached family homes in Worsley and Boothstown.

Common jobs in Salford

In Salford we're most often booked for apartment boiler swaps with building-management sign-off, unvented cylinder installs in Worsley and Boothstown family homes, landlord CP12s across Ordsall and Broughton, and bathroom refits in the older Eccles terraces.

How we work

Every job in Salford is Gas Safe registered work (Reg. 636807), covered by £5m public liability, quoted in writing before we start, and finished with a 12-month workmanship guarantee.

Services available in Salford

Full plumbing & heating cover across Salford.

One family firm, one standard — from a dripping tap to a full heat pump install. Every service below is available anywhere in Salford and the surrounding M3, M5, M6, M7, M27, M28, M30 postcodes.

New boiler installation

ATAG approved installers fitting combi, system and regular boilers with warranties up to 18 years — properly sized to your property.

Boiler repair

Fixed-price fault diagnosis and repair on all major boiler brands. Root-cause fix, 12-month workmanship guarantee.

Boiler servicing

Full annual boiler services with flue gas analysis and benchmark logbook stamped — keeps warranties valid and gas bills down.

Central heating

Full central heating systems, power flushes, radiator upgrades and controls — designed and balanced properly.

Unvented cylinders

G3 qualified installs and annual servicing of mains-pressure hot water cylinders — strong showers at every outlet.

General plumbing

Leaks, taps, toilets, radiators, mains upgrades and rewashers — tidy, permanent fixes with a 12-month workmanship guarantee.

Bathroom installations

Full bathroom refits — from strip-out and tanking through to plumbing, tiling and second-fix — one team, one price.

Air source heat pumps

Q-Smart heat pump installers. Eligible households can claim up to £7,500 through the Boiler Upgrade Scheme.

Underfloor heating

Wet and electric underfloor systems designed room-by-room with proper zoning and controls.

Smart heating controls

Weather-compensating controls and smart thermostats that cut gas use without cutting comfort.

Domestic gas

All domestic gas work under Gas Safe Reg. 636807 — hobs, cookers, fires, meter moves and landlord CP12s.

Commercial & landlords

Planned maintenance, RAMS and reactive cover for landlords, letting agents, offices, pubs and small facilities.

Why choose Eco in Salford

Concrete reasons, not marketing fluff.

Salford-wide coverage

M3, M5, M6, M7, M27, M28 and M30 — apartments, terraces, semis, HMOs and detached family homes.

Apartment install experience

We handle the building-management coordination for Quays and MediaCityUK apartment installs properly — flue termination, riser access, sign-off packs.

ATAG approved installers

Approved to fit ATAG boilers with warranties up to 18 years. The longest manufacturer cover you can get in Salford.

Landlord friendly

Portfolio CP12s across Ordsall and Broughton with certificates emailed the same day.

Written, itemised prices

Fixed prices in writing before any work starts. No surprises on invoice day.

12-month workmanship guarantee

Every Salford install carries our own 12-month workmanship guarantee on top of the manufacturer warranty.

Common Salford plumbing & heating issues

What we see most often in Salford homes.

Salford's blend of dense apartment stock, Victorian terraces and 1930s semis produces recognisable issues. We plan for them at survey stage.

Apartment flue and riser rules

Quays and MediaCityUK blocks have strict rules on flue termination and shared riser use. We read the building-management spec before quoting so the install day isn't a scramble.

Weak mains pressure in old Ordsall terraces

Older terraced streets in Ordsall and Weaste can suffer poor incoming pressure. We flow-test before recommending a boiler type.

Unvented cylinder demand in Worsley family homes

Multi-bathroom homes in Worsley and Boothstown usually outgrow a combi. A system boiler with an unvented cylinder gives the simultaneous flow bigger households actually need.

HMO compliance across Broughton and Kersal

Salford has a large HMO market. Every property needs a valid CP12 and a clean paper trail — we handle both.

Sludge in tired 1950s systems

Swinton and Pendlebury semis with original radiators often have sludged systems. A power-flush and magnetic filter typically restores heat output before a boiler even needs changing.

Failed heat-only boilers with no controls

Lots of Salford properties still run on 30-year-old heat-only units with a single thermostat. Modern system boilers with weather compensation cut gas use sharply.

Our process

The same tidy sequence on every Salford job.

  1. Step 1

    Get in touch

    Call, WhatsApp or drop us a message. We reply within working hours the same day.

  2. Step 2

    Free survey or quote in 24 hrs

    For anything bigger than a tap washer we visit Salford and give a written, itemised price.

  3. Step 3

    Book a firm date

    You get a confirmed slot — no vague windows. We arrive when we say we will.

  4. Step 4

    Install to spec

    Dust sheets down, work carried out to manufacturer and Gas Safe standards, area cleaned before we leave.

  5. Step 5

    Certification & guarantee

    Certificates, warranty registration and a 12-month workmanship guarantee — all emailed to you.

Salford FAQs

Questions we get asked in Salford.

Do you serve Salford?+

Yes — we cover Salford across M3, M5, M6, M7, M27, M28 and M30, including MediaCityUK, Salford Quays, Ordsall, Weaste, Eccles, Swinton, Pendlebury, Walkden, Worsley, Boothstown, Broughton and Kersal.

How fast can you get to me in Salford?+

Most Salford enquiries get a survey booked within 24 hours in working hours. Apartment installs at the Quays typically need an extra day for concierge and access coordination.

How much does a new boiler cost in Salford?+

It depends on boiler type, brand, warranty length and any system upgrades. Apartment installs sometimes carry a small allowance for flue routing or building sign-off, all detailed in the written quote.

Do you offer 24-hour emergency call-outs in Salford?+

We don't run a 24/7 line. We work Mon–Sat 8am–6pm and prioritise existing Salford customers for urgent no-heat and leak jobs inside those hours.

Can you install boilers in Salford Quays apartments?+

Yes. We handle building-management coordination, flue routing and communal riser access. Some blocks maintain approved-installer lists — we're happy to submit our certification pack.

Do you cover landlord CP12s in Salford?+

Yes — single properties and portfolios across Ordsall, Broughton, Kersal and beyond. Certificates emailed on the day of the visit.

Can you fit heat pumps in Salford under the Boiler Upgrade Scheme?+

Yes, where the property is suitable. Semi-detached and detached homes in Worsley, Boothstown and Swinton are often good candidates. Grants up to £7,500 through our Q-Smart partnership.

Are you Gas Safe registered?+

Yes — Gas Safe Register 636807. Every gas job across Salford is carried out under our own registration. Always ask to see the ID card.

Do you fit bathrooms in Salford apartments?+

Yes — including wet rooms with proper tanking for upper-floor apartments where a failed floor could damage the flat below. Insurance-grade waterproofing on every job.

Which nearby areas do you cover?+

Manchester, Bury, Middleton, Rochdale and Oldham alongside Salford. See our other service-area pages for detail.

Booking Salford jobs now

Salford engineers, written quotes, tidy installs.

Book a free home survey in Salford and get a written, itemised quote — with real options, warranty comparisons, and no obligation to go ahead.

Get my free quote Call 07582 870312

Gas Safe Reg. 636807 · £5m public liability · Mon–Sat 8am–6pm

Nearby areas we cover

Also serving these Greater Manchester towns

One team, one standard — across every plumbing and heating job in Greater Manchester. Back to homepage or contact us.